You may not realize it, but most front-loading washers require high efficiency HE detergents with low foaming action. Pull out the washer to look behind it and check that the hose is kink-free, then carefully push the machine back into place so that you do not inadvertently crimps the hose again.
Small items—like pennies, keys, buttons, or clothing clips—can fall out of pockets and off of clothing, then lodge themselves in the hoses that attach the washer to the drain pump. Ultimately, the blocked drainage prevents the machine from spinning. In some washers, the drain pump typically located in the back of the washer, near the floor can be accessed without removing the back of the washer, and other models require you to detach the washer back.
Then remove the clamps that hold the hoses in place, clear any clogs that you find, and reattach the hoses. A broken drive belt, or one that has slipped off the pulley wheel, can cause the washer to agitate during the wash cycle and yet—despite the noise of the motor running—the drum remain still during the spin cycle. To determine if this is the case, remove the back of the washer and visually check to see if the belt is still on the pulley.
If not, you may need to replace the drive belt. Disclosure: BobVila. There may be a problem with the controls; in this case, call an appliance repair person. Get Free Bids Now! Lift the lid during the spin cycle.
If the tub is not spinning, you may have a damaged motor coupler. You can find affordable motor couplers on Amazon , but call an appliance repair person to replace this part. If the tub is spinning, recheck the load to make sure it is balanced. If you are certain the load is balanced but your clothes still come out dripping, you may need to have a damaged motor pulley, tub bearing, belt, or clutch replaced.
To find out, you can listen and feel the outside of the washer, or open the lid during the spin cycle for top-load machines to see if the drum is in motion. Make sure there's no laundry in the machine while performing this check. When washers have spin cycle issues, they often won't go through the drain cycle either.
So if your washing machine won't spin or drain, the same troubleshooting steps should work. Your appliances matter. So does your time. Make an appointment now, and our technicians will get you back up and running as soon as the same day. Schedule a repair. When your washing machine is overstuffed, it may fill but not spin. Some washer models have automatic detectors to tell you if you've overfilled your washing machine, but many don't.
The machine generally won't recognize the issue until the washer has filled with water. If that's the case, unfortunately, your only solution is to remove some of the soggy clothes. If you're trying to wash only a couple of heavy items, your washing machine may not spin or may not spin effectively.
Never bypass the lid switch as serious injuries can occur. An excessively worn drive belt can prevent your top-load or front-load washer basket from spinning. The repair professional will also verify that the idler pulley or motor glide is providing the proper belt tension and moves freely.
The direct drive motor coupling is used on some top load and front-load machines instead of a belt drive. Its main purpose is to transfer power from the motor to the transmission. As it wears, the coupling will slip and eventually fail to engage the drive forks that allow the basket to agitate or spin. This diagnosis and repair will require removing the cabinet to access the direct drive motor coupling, so contact your repairman soon.
A clutch assembly is used on some top-load washers to lock the transmission to aid the spin cycle. Repeated friction can cause the clutch pads to wear and scrape; eventually slowing the spin cycle or stopping it altogether.
You may notice other symptoms such as:. This is another complicated mechanical repair that should be left to the professionals.
The washing machine technician will be able to accurately determine if the clutch is worn or damaged and if it should be replaced. While these are the most common causes of spin failure on the front- and top-load washing machines, other issues can present problems.
0コメント